Notes from our own work with medical equipment parts: what fails, how it shows up, which part number resolves it, and what to check before you order.
Decoding GE CT error codes (Optima CT660, Revolution EVO/Apex): SDA3, gantry, detector and tube errors. Spare part categories and the order of log-based diagnostics.
The procedure for tracing a leak in the breathing circuit: falling inspired volume, a failed leak test, rising gas consumption. Catalog valves, seals and filters that are replaced most often.
Replaceable assemblies for GE devices: absorber seals 1406-3414-000-S for Aestiva, reducer coupling 6600-1176-400 for Giraffe OmniBed, CAM14 version V2 acquisition system 900995-002.
How to build a maintenance schedule for a fleet of anesthesia and respiratory equipment: inspection intervals, catalog service kits, scheduled consumable units, operating-hours accounting and documentation.
Rechargeable batteries: 989803210521 for Philips MP monitors, 989803196521 for MX100/X3, M5070A for HS1/FRX, 989803190371 for DFM100, battery 5501899 for GE.
Typical faults of the incubator humidification and thermoregulation circuit: float and reservoir, heated tube, patient and ambient sensors, fan. Catalog items for the Giraffe OmniBed.
X-ray tubes for CT of Chinese manufacture: DURA202/DURA352, CTR1720/1725/1735/1740, MX135/DA135, MX200, Performix 40, MRC600, vMRC, CTR2250, ATHLON.
BIS monitoring in anesthesiology: what the bispectral index is, how the BIS module, the BIS monitor and the BIS sensor relate to each other, and how to select the right item by number (PN).
Catalog items for servicing and configuring GE units: SFW VCB/VMB kit 1505-8001-000, USB converter 1505-8586-000, interface board 1505-5508-000, ventilator communication tool M1220157.
Mindray spare parts: NIBP (blood pressure) cuffs CM1201–CM1204 and CM1303, ECG cables, SpO₂ sensor 512E, BIS module. 11 catalogue items by PN. Availability confirmed at order.
Mindray accessories for patient monitors: ECG cable 0010-30-43127, leads 0010-30-43145 and 0010-30-43251, SpO₂ sensor 512E-30-21373, blood pressure cuffs — 9 items.
Field practice on the 9100c and 9100c NXT: moisture and water from the compressor in the gas line, hollow noise on inspiration, loss of tidal volume and PEEP with the function switched off. Diagnostic order and spare parts.
Philips defibrillation electrodes and fetal sensors: 989803196431, M5071A, 989803139261, M3716A, M3713A, cable 989803197111, sensors 867246 and 867248.
Field practice on GE LightSpeed and BrightSpeed CT: C-pulse error, gantry lasers not turning on, the tube not warming up, air calibration aborting. Diagnostic order and suitable tubes.
Philips 9898xxx ECG and telemetry cables for the MX40 and TC10/20/30/50 electrocardiographs: 989803171851, 989803171831, 989803171821, 989803164281, 989803151691.
Philips M16xx/M19xx ECG cables for MP, MX, X3 monitors: M1973A, M1974A, M1968A, M1971A, M1644A, M1645A, M1675A, M1643A, AHA and IEC standards, 3 and 5 leads.
Philips SpO2 and NIBP accessories for MP, MX and X3 monitors: sensors M1191BL, M1192A, M1193A, M1196A, M1133A, cable M1943AL, tubes M1599B and cuffs M4555B.
GE Engström and R860 ventilator: flow sensor 1505-3208-000, MPOS valve 1505-3209-000-S, exhalation valve 1505-3848-000, board 1505-5508-000 and oxygen filter.
Spare parts for GE Giraffe, OmniBed, Panda and Lullaby infant incubators and warmers: assembly M1110788-S, bed 6600-1041-700, humidifier 6600-0224-850.
Absorbed X-ray dose kit for the Omnibed heater (6600-0220-850) for GE: purpose, contents, replacement and procurement for Russia.
Modules and accessories for GE patient monitors: E-ENTROPY-01 M1235680, maintenance kits 2093594-001 and 2093610-001, ECG cables 2106305-001, DURA cuffs, tube.
GE breathing circuit consumables: capsule 1500-3378-000, U-cup 1500-3359-000, APL diaphragm 1406-3331-000, O-ring seals and condenser 1407-3133-000-S.
GE respiratory flow sensors: 1505-3231-000 (reusable) and 1505-3231-001 (single-use). Signs of wear, replacement, compatibility and procurement for Russia.
GE anesthesia machine electronics and valves: board 1011-8000-000-S, valve 1503-3854-000-S, flow sensors M1174442-S1 and 2087640-001-S, valve 0211-1454-100.
Philips ultrasound probes for EPIQ and Affiniti systems: C5-1, C6-2, C9-4v, S4-2 and L12-5 — purpose, compatibility with models and purchase with delivery to Russia.
Annual maintenance kit for the EVAIR compressor (302-082-000) for GE: what is included, why it should be replaced, and how to buy it for Russia. Service schedule and procurement.
Engström Carestation ventilator and Carestation 600 station: USB converter 1505-8586-000, SFW VCB/VMB software 1505-8001-000 and APL diaphragm assembly 2079638-001-S.
Exhalation valve assembly for GE ventilators: 1505-8568-000 (reusable) and 1505-8568-001 (disposable). How to recognize wear, replace and buy for Russia.
Canister lid 2101113-001-S and soda lime canister 1407-7004-000 for GE: the role of the CO₂ absorption system, signs of wear, replacement and procurement for Russia.
Mini condensate collector 8002174 and the GE D-Fend family: why a water trap is needed, how to choose between the mini and D-Fend Pro, installation and purchasing for Russia.
Single-use GE spirometry tubes: 884101 (3 m) and 890031 (2 m, for the ICU) — how to choose the length, rules of use, common mistakes and replacement.
Reusable SpO2 sensor DS100A and the TruSignal finger sensor (TS-SA-D) for GE monitors: how they work, selection, care, replacement and purchasing for Russia.
ECG accessories for GE: lead cables 2104727-001 and 2106385-001 (3-lead snap), MAC800 keyboard 2040049-001. Compatibility, selection and purchasing for Russia.
Reusable GE temperature probes for patient monitoring: esophageal/rectal 2107176-031, 2107176-032 (pediatric), skin 2107176-033 and cable 2104178-002. Compatibility and purchasing for Russia.
GE monitoring accessories for electrocardiography and pulse oximetry: shielded ECG cable 2003419-001 (10 contacts, 10 feet), RT GRB/MNK IEC leadwire sets 403751-025 (5 pcs) and 403751-026 (10 pcs), TruSignal TS-E-D ear sensor.
Membrane assembly LU43996 for the Achilles EXPII ultrasound bone densitometer: purpose, signs of wear, replacement and purchasing of the original for Russia.
A guide to GE neonatal monitoring sensors for the NICU and maternity departments: Care Plus incubator reusable sensor 2045964-001, disposable temperature sensor 2074816-001, RoHS reusable patient sensor 2075796-001.
Brushless DC motor 5513688 for GE medical equipment: signs of wear, replacement, selection and purchasing of the original for Russia. Compatibility and FAQ.
Single-use GE respiratory flow sensors for spirometry: D-lite+ (896952) for adults, Pedi-lite+ (8001948) for children. Compatibility with Carescape R860, hygiene, where to buy.
Air filter 2107356-001 for GE medical equipment: why it is needed, when to replace it, how to select it and buy the original for Russia. Compatibility and FAQ.
The annual GE anesthesia circuit consumables kit: soda lime canister 2071165-001-S, flow sensor 2069358-001-S, sevoflurane adapter 2106572-003, exhaust lines 8004462/8004463.
Datex Ohmeda respiratory flow sensor 2089610-001 for GE: how to identify wear, replace it and buy the original for Russia. Compatibility, failure symptoms, FAQ.
How to choose and replace the oxygen sensor (O₂ cell) for GE anesthesia machines: 2071018-001-S, the C30 sensor (M1223210-S) and the O₂ sensor cable 1009-5570-000. Compatibility, service life, purchasing for Russia.
The D-GATE calibration gas regulator (755534-HEL) for GE: calibration of monitor gas modules, application, compatibility and purchasing for Russia.
Muscle relaxation sensor 897439 for neuromuscular conduction monitoring during anesthesia. How it works, compatibility with monitors, replacement and purchasing for Russia.
PiCCO cable M1182448 for hemodynamic monitoring. What PiCCO is, how the cable works, compatibility with GE monitors, replacement and purchasing for Russia.
Giraffe OmniBed GE incubator corner ring (6600-1248-500): purpose, installation, compatibility and procurement for clinics in Russia and the CIS.
GE depth of anesthesia monitoring modules: E-BIS-01 (M1127542) and BIS module (6800-30-50851). How the bispectral index works, compatibility, replacement and procurement for Russia.
Chinese alternatives CTR1735, CTR1725, CTR1720, CTR1740 for Philips Brilliance/MX4000/MX16 and Neusoft NeuVizDual/NeuVizTwin. Compatibility, selection by PN, delivery across Russia and the CIS.
Anesthesia machine servicing: why calibrate PEEP/INSP with tool 1504-3016-000, and how to fill sevoflurane safely through the QUIK-FIL adapter 115-026747-00.
A Chinese alternative to tubes GS-30722 and GS-30723 for Sinovision Insitum 338/318/AlphaCT 358S and MinFound ScintCare blue 755. Compatibility, selection by PN, delivery across Russia and the CIS.
GE R860 ventilator consumables: neonatal flow sensor 1505-3272-000, D-FEND PRO+ water trap M1200227 and nebulizer cable 1505-5602-000. Selection, replacement, purchasing for Russia.
Chinese alternative to DURA422 and DURA688 tubes for Siemens SOMATOM Emotion 6/16 and Perspective. Compatibility, selection by PN, warranty, delivery across Russia and the CIS.
Chinese alternative to MX200 and DA200 X-ray tubes for GE OPTIMA CT 660 and LightSpeed ZX/iNx/IQx CT scanners. Compatibility, service life, selection by PN, delivery across Russia and the CIS.
Accessories for the GE MAC2000 portable electrocardiograph: high-capacity battery, AHA/IEC keyboard and ECG cable set. Compatibility and replacement.
GE lithium batteries for CARESCAPE B20/B30/B40, DASH 3000/4000/5000, B450 and B650 monitors. Comparison of PNs, voltage and service life. Compatibility and replacement.
120/230 V humidifier heater assembly 6600-0245-850 for the Giraffe OmniBed / OmniBed Carestation incubator. Fault diagnostics and replacement rules.
The APL valve in a GE anesthesia machine: four versions for Aespire 7100, Aestiva, Carestation 600 and Aelite NXT, a model-to-PN table and signs of failure.
Consumable parts for the Giraffe OmniBed incubator: humidifier reservoir water collector assembly 6600-0216-850 and cast access window door 6600-1238-500. Compatibility and replacement.
A complete guide to choosing X-ray tubes for CT scanners: 7 Chinese alternatives for Philips, Siemens, GE, Neusoft, Sinovision, United Imaging. Compatibility, prices, warranty. Delivery across Russia and the CIS.
Soda lime canister 1407-7004-000 for GE Datex Ohmeda anesthesia machines. Compatibility, replacement intervals and common mistakes.
The GE SpO₂ ecosystem: TruSignal TS-SA-D sensor, encrypted Nellcor cable 2021406-001, R860 ventilator filter 5830446. Compatibility and application.
A complete guide to GE ECG accessories: CAM14 ECG acquisition module (900995-003), T2100/Cardiosoft cable (2104403-003). Compatibility, length, where to buy.
A complete guide to GE NIBP cuffs with the DINACLICK connector: DURA-CUF (DUR-A2-2A-A), hoses 2058203-002-A 3.6 m. Compatibility, sizes, where to buy.
Five typical mistakes when buying spare parts for GE, Philips and Siemens equipment: from looking only at price to ignoring lead times. Practical advice.
A detailed breakdown of sensor and module compatibility for GE CARESCAPE and Dash monitors: M10, E-SCAIO, E-MINIC and other accessories.
The complete list of consumables and spare parts for Datex Ohmeda AS/3, S/5, Aespire and Carestation anesthesia machines. Fast search for the part you need.
A practical guide to choosing a supplier of original GE Healthcare parts on the Chinese market: 6 evaluation criteria and the typical pitfalls.
A guide to the E-MINIC module: Microstream technology, monitoring parameters, areas of application and a comparison with E-SCAIO.
The GE Healthcare E-SCAIO module: which gases and anaesthetics it measures, which anesthesia machines and monitors it is compatible with, and what that gives you in the clinic.
A guide to cleaning and calibrating respiratory flow sensors for GE Datex Ohmeda AS/3 and S/5. Extend service life and keep measurements accurate.
The M10 oxygen sensor for GE Datex Ohmeda anesthesia machines and monitors: how it works, the compatible models, service life, diagnosis and replacement.
A selection guide for GE Datex Ohmeda sampling lines: connector types, length, packaging. Answers to the questions that come up most often about replacement and use.
The complete D-Fend Pro guide: how to choose between the clear and the black version, installation, replacement and answers to the questions that come up most often. Original GE Healthcare water traps.
Five key criteria for choosing a supplier of original GE parts for medical equipment. Practical advice for Russian clinics and service companies.
O₂ sensor, breathing flow sensor, D-Fend water trap and gas sampling line: the symptoms of the most common faults on GE Datex Ohmeda anesthesia machines and how to fix them with original parts.