MX200 / DA200 X-ray Tube for GE CT: Chinese Alternative for OPTIMA CT 660 and LightSpeed

X-ray Tube MX200 / DA200 for GE CT: Chinese Alternative for OPTIMA CT 660 and LightSpeed

The X-ray tube is the most expensive and the fastest-wearing unit of a GE computed tomography scanner. For clinics running GE OPTIMA CT 660 and LightSpeed ZX/iNx/IQx systems, the question of timely and cost-effective tube replacement is especially acute: an original GE tube is expensive, and delivery times due to sanctions restrictions can stretch into months.

In this guide we examine two key Chinese-made items that MediAccessori supplies for GE systems: MX200 (for OPTIMA CT 660) and DA200 (for LightSpeed ZX/iNx/IQx). We rely on real data from our catalogue and make no advertising promises.

1. Why a Chinese Alternative to a GE Tube Is Needed

CT tube replacement is a planned but costly operation. The original GE tube (manufactured at GE subsidiary plants and approved OEM partners) is built into the cost of owning a scanner. However, with limited budgets and disruptions to direct supplies of original components, clinics are increasingly moving to proven Chinese alternatives.

Chinese factories (Hangzhou Wandong, Beijing Kunlun and others) have mastered the production of tubes for mid-range CT scanners and make products of the same design: a glass or metal envelope, a rotating anode, a focal spot of 0.5–1.2 mm. For the OPTIMA and LightSpeed platforms, compatibility has been proven over years — these are among the most widespread GE scanners in the post-Soviet region.

We work only with complete alternatives — new tubes with a factory warranty and confirmed service life, not refurbished ones.

2. MX200: for GE OPTIMA CT 660

PN: MX200

Target scanner: GE OPTIMA CT 660 — one of the most common 64-slice GE scanners in the region.

Key selection points for OPTIMA CT 660:

3. DA200: for GE LightSpeed ZX / iNx / IQx

PN: DA200

Target scanners: the GE LightSpeed ZX, LightSpeed iNx and LightSpeed IQx series.

The LightSpeed series is another large GE line, widely represented in Russian and Kazakh clinics. To replace the tube on these platforms, the DA200 alternative is used:

4. Compatibility Table

Do not use the MX200 for LightSpeed, or vice versa — the platforms are different and interchangeability is not guaranteed. If in doubt, send us a photo of the tube nameplate and the CT model.

5. How to Identify the Right Alternative

Step 1. Determine the CT brand and model The nameplate on the scanner housing or the "System Information" section on the operator console.

Step 2. Find the original tube PN Three ways: 1. Service documentation — the "X-ray tube replacement" section. 2. The nameplate on the tube itself (after removing the cover). 3. Your engineer's log of previous replacements.

Step 3. Compare with the table If the PN matches MX200 or DA200 — you are done. If not — send a photo and our engineer will select a compatible tube.

6. Service Life and Economics

For clinics whose factory warranty has expired, the price difference often justifies choosing the alternative even with a somewhat shorter service life.

7. Common Selection Mistakes

8. Delivery Times

9. How to Order

1. Write to Telegram @GEpartsV_bot or email [email protected], state the CT model (OPTIMA CT 660 / LightSpeed ZX / iNx / IQx) and the original tube PN.
2. The engineer will confirm compatibility and issue a commercial offer.
3. Contract/invoice, 30–50% prepayment, balance before shipment.
4. Shipment from the factory, tracking, delivery to your address.
5. Installation by the clinic (if an engineer is available) or with our partner engineer.

10. Contacts

Sources: MediAccessori catalogue (products_current.json, PN MX200/DA200); GE OPTIMA CT 660 and LightSpeed operation manuals; service engineers' experience.