Philips SpO2 Sensors, Extension Cables and NIBP Cuffs: M1191BL, M1192A, M1193A, M1196A, M1133A, M1943AL, M1599B and 989803209771
Philips SpO2 and NIBP accessories for MP, MX and X3 monitors: sensors M1191BL, M1192A, M1193A, M1196A, M1133A, cable M1943AL, tubes M1599B and cuffs M4555B.
SpO2 sensors and blood pressure cuffs are the most frequently ordered accessories in departments with Philips monitors. They belong to consumable elements: the sensor contacts the patient's skin, the cuff works in a cycle of inflation and pressure release, the cable is bent with every repositioning. That is why accessories fail earlier than the monitoring station itself, and the demand for them is constant.
This guide covers ten items that have entered the MediAccessori catalog for Philips monitors: five SpO2 sensors, an SpO2 extension cable, two extension tubes for the cuff and two NIBP cuffs. For each item the official catalog description, compatible equipment, an approximate price in rubles and stock availability are given. At the end there is a summary compatibility matrix, selection rules for the task and typical operating errors.
1. Why SpO2 and NIBP accessories are worth keeping in reserve
Three reasons why Philips accessories are purchased in cycles rather than one at a time:
- •SpO2 sensor — a consumable element: it is attached to the patient, contacts the skin and works in every measurement. Reusable sensors wear out mechanically, disposable ones are consumed according to the infection control protocol.
- •NIBP cuff — works under pressure: over time the chamber loses tightness, and the measurement drifts into a systematic error.
- •Cables and tubes — are bent with every repositioning and patient transport. Damage to the cable at the bend point is a typical cause of SpO2 channel failure.
The practical conclusion: a department should keep a set of sensors by patient type (adult, pediatric, neonatal), a replacement cuff of each size and one or two extension cables.
2. SpO2 sensors: the M119x family and the disposable M1133A
All sensors in the selection are tied on the card to the same broad list of Philips monitors: MP2, MP5, MP20/30/40/50/60/70/80, MX400/450/500/550/600/750/800, MX100, X3, GS10/20, CM10/12/100, G40E/60E/80E, DFM100, XL+ and MRX, as well as other devices. They differ in design, fastening type and purpose.
PN M1191BL — reusable adult sensor
Official catalog description: New original Philips SpO2 sensor, adult, extended, D-type connector, 8 contacts, 3 m cable, integrated, reusable
Approximate price: 19,800 ₽ · Availability: 100 pcs.
The extended integrated sensor is the basic item for an adult department: a 3 m cable allows work without an additional extension.
PN M1192A — reusable small-size sensor for children and adults
Official catalog description: New original Philips SpO2 sensor, D-type connector, 8 contacts, integrated, small size, for children/adults, reusable
Approximate price: 21,796 ₽ · Availability: 100 pcs.
PN M1193A — reusable neonatal sensor
Official catalog description: Original Philips SpO2 sensor, D-type connector, 8 contacts, integrated, for newborns, with hand/foot fastening (wrap type), reusable
Approximate price: 21,829 ₽ · Availability: 100 pcs.
The wrap type of fastening is used in neonatology: it is secured on the hand or foot and does not require a clip.
PN M1196A — reusable adult sensor with finger clip
Official catalog description: New original Philips SpO2 sensor, D-type connector, 8 contacts, 3 m cable, integrated, adult finger clip
Approximate price: 10,312 ₽ · Availability: 100 pcs.
The most affordable item in the family: an integrated adult finger clip.
PN M1133A — single-patient disposable sensor
Official catalog description: Original Philips SpO2 sensor, trapezoidal connector, 7 contacts, for newborns/infants/adults, disposable, for a single patient, 20 pcs. per box
Approximate price: 28,875 ₽ · Availability: 100 pcs.
The disposable design changes the purchasing logic: the item is supplied in boxes of 20 pcs. and is consumed according to protocol rather than serviced. The trapezoidal 7-contact connector differs from the D-type connector of reusable sensors — this matters when selecting an extension cable.
3. Extension cables and tubes
PN M1943AL — SpO2 extension cable
Official catalog description: Original Philips SpO2 extension cable, 3 m, 9-to-8 contact adapter, from D-type connector to trapezoidal connector
Approximate price: 18,034 ₽ · Availability: 100 pcs.
The cable solves two tasks at once: it adds 3 m of length and connects sensors with different connector types — the D-type and the trapezoidal one. This makes it a universal reserve item for a department that uses both reusable and disposable sensors.
PN M1599B — extension tube for the NIBP cuff
Official catalog description: Original Philips extension tube for cuff connection (for adults/children), 3 m, reusable
Approximate price: 5,940 ₽ · Availability: 100 pcs.
PN 989803209771 — extension tube for the NIBP cuff (for adults)
Official catalog description: Original Philips extension tube for adult cuff connection, 3 m, reusable
Approximate price: 4,950 ₽ · Availability: 100 pcs.
The tubes are needed where the monitor is far from the patient, and also for measurement on a distant limb. The length of both items is 3 m; the difference is in the declared area of application: M1599B is described for adults and children, 989803209771 for adults.
4. NIBP cuffs: M4555B and M4553B
PN M4555B — adult cuff
Official catalog description: New original adult Philips cuff, single-tube, dark blue, limb circumference: 27.5–36 cm
Approximate price: 2,145 ₽ · Availability: 100 pcs.
PN M4553B — pediatric cuff
Official catalog description: New original pediatric Philips cuff, single-tube, green, limb circumference: 14–21.5 cm
Approximate price: 1,947 ₽ · Availability: 100 pcs.
Both cuffs are single-tube and connect to the monitor via an extension tube. The color coding (dark blue for adults, green for children) helps avoid mixing up sizes during rapid patient turnover.
5. Compatibility matrix (summary)
| PN | Name (catalog) | Price, ₽ | Availability |
|---|---|---|---|
| M1133A | SpO2 sensor, disposable, for newborns/infants/adults, 20 pcs. per box | 28,875 | 100 pcs. |
| M1193A | SpO2 sensor, neonatal, hand/foot fastening, reusable | 21,829 | 100 pcs. |
| M1192A | SpO2 sensor, small size, for children/adults, reusable | 21,796 | 100 pcs. |
| M1191BL | SpO2 sensor, adult, extended, 3 m cable, reusable | 19,800 | 100 pcs. |
| M1943AL | SpO2 extension cable, 3 m, 9-to-8 contact adapter | 18,034 | 100 pcs. |
| M1196A | SpO2 sensor, adult finger clip, 3 m cable | 10,312 | 100 pcs. |
| M1599B | Extension tube for NIBP cuff, 3 m, for adults/children | 5,940 | 100 pcs. |
| 989803209771 | Extension tube for NIBP cuff, 3 m, for adults | 4,950 | 100 pcs. |
| M4555B | NIBP cuff, adult, single-tube, circumference 27.5–36 cm | 2,145 | 100 pcs. |
| M4553B | NIBP cuff, pediatric, single-tube, circumference 14–21.5 cm | 1,947 | 100 pcs. |
All items in the selection are tied on the cards to the same list of Philips monitors: MP2, MP5, MP20/30/40/50/60/70/80, MX400/450/500/550/600/750/800, MX100, X3, GS10/20, CM10/12/100, G40E/60E/80E, DFM100, XL+, MRX and other devices.
The table is built from the MediAccessori catalog cards. Final compatibility for a specific monitor model and revision is confirmed by a service engineer.
6. How to choose an accessory for the task
Practical selection rules:
- •By patient type. Newborns — M1193A (wrap type) or disposable M1133A. Children and small adults — M1192A. Adults — M1191BL (extended) or M1196A (finger clip).
- •By connector. D-type connector (8 contacts) on reusable sensors, trapezoidal (7 contacts) on the disposable M1133A. The transition between them is provided by the extension cable M1943AL.
- •By operating mode. Continuous monitoring of one patient — a reusable sensor. Short-term monitoring with high infection control requirements — the disposable M1133A.
- •By cuff size. Selection is based on limb circumference: 27.5–36 cm — M4555B, 14–21.5 cm — M4553B. A wrong size produces a systematic measurement error.
- •By monitor distance. If the cable or tube length is insufficient, add M1943AL for the SpO2 channel, M1599B or 989803209771 for the NIBP channel.
7. Typical faults and care
- •The SpO2 channel shows no signal or shows it intermittently — check the sensor and the cable bend point; if the insulation or connector is damaged, replace the sensor.
- •Saturation reading too low or too high with the patient in normal condition — check the sensor type and size, the tightness of fastening and the absence of cable twisting.
- •The device does not see the sensor — check that the connector matches (D-type or trapezoidal) and that the extension cable M1943AL is working.
- •The cuff does not build pressure or holds it unstably — check the cuff and the extension tube; if tightness is compromised, replace the cuff rather than repairing it.
- •Systematic discrepancy between NIBP readings and a reference device — check the cuff size against the limb circumference.
Caring for the accessories is simple: process according to the department protocol, avoid twisting and sharp bends at the connectors, store sensors without load on the cable.
8. How to plan the purchase
A practical scheme for a department with Philips monitors:
- •permanent reserve — cuffs M4555B (2,145 ₽) and M4553B (1,947 ₽) in both sizes, extension tubes M1599B (5,940 ₽) and 989803209771 (4,950 ₽);
- •working set by patient types — M1196A (10,312 ₽) and M1191BL (19,800 ₽), and for neonatology — M1193A (21,829 ₽);
- •protocol-driven consumable item — disposable M1133A (28,875 ₽, box of 20 pcs.);
- •cable reserve — M1943AL (18,034 ₽), one or two per department depending on the number of beds.
All items in the selection are available in stock at 100 pcs., which makes it possible to build a delivery for several departments at once and plan consumption for a year.
Related materials: an overview of GE monitor accessories and modules is in the article ge-patient-monitor-modules-cables-cuffs-guide; GE anesthesia machine electronics and valves are in the article ge-anesthesia-carestation-electronic-valve-parts-guide; spare parts for GE Engström and R860 ventilators are in the article ge-engstrom-ventilator-spare-parts-guide; spare parts for infant incubators and warmers are in the article ge-maternal-infant-care-incubator-warmer-spare-parts-guide.
9. Where to buy
MediAccessori supplies Philips SpO2 sensors, extension cables, tubes and NIBP cuffs for MP, MX, X3, GS, CM, G40E/60E/80E, DFM100, XL+ and MRX monitors to Russia and the CIS:
- •✅ Original Philips Healthcare products
- •✅ Stock availability of 100 pcs. for the items in this selection — shipment without a long wait
- •✅ Delivery (lead time confirmed at order placement), documentation for the item
- •✅ Selection by patient type, connector type and cuff size
Contact: Telegram @GEpartsV_bot or email [email protected].
Sources: MediAccessori catalog (PN M1133A / M1193A / M1192A / M1191BL / M1196A / M1943AL / M1599B / 989803209771 / M4555B / M4553B); Philips Healthcare documentation; service engineers' practice. For sensor technical parameters, refer to the documentation of the specific product revision.
Frequently asked questions
Need the part number?
Send us the equipment model or the part number and we will check it against the catalogue. You can also search the parts catalogue directly.