EVAIR GE Compressor Annual Maintenance Kit: 302-082-000 — Contents and Replacement
Annual maintenance kit for the EVAIR compressor (302-082-000) for GE: what is included, why it should be replaced, and how to buy it for Russia. Service schedule and procurement.
EVAIR GE Compressor Annual Maintenance Kit: 302-082-000 — Contents and Replacement
A medical air compressor is an important part of the pneumatic system of a ventilator and an anesthesia machine. It supplies compressed air to the breathing circuit, and the correct delivery of the gas mixture and patient safety depend on its stable operation. Like any equipment with consumable parts, the compressor requires scheduled maintenance.
In this guide we look at the annual maintenance kit for the EVAIR compressor (PN 302-082-000) — what it is, why it is needed, how maintenance is carried out, and how to order the original part for Russia and the CIS.
1. Why an annual maintenance kit is needed
The compressor within the breathing system operates almost continuously: filters pass through it, seals are loaded, and moving parts wear. Over time:
- •Filters become contaminated — the cleanliness of the supplied air decreases.
- •Seals wear out — leaks and pressure drops appear.
- •Performance degrades — the compressor runs overloaded and switches on more often.
The scheduled maintenance kit 302-082-000 allows the wearing elements to be replaced in good time and restores the compressor to its specified performance.
2. What the EVAIR compressor is
EVAIR is a series of GE medical compressors used as part of ventilators and anesthesia stations to supply compressed air to the breathing circuit. The compressor provides the required pressure and air flow, and the operation of the machine in modes with air supply depends on it.
Keeping the compressor in working order directly affects the reliability and safety of ventilation.
3. Breakdown of item 302-082-000
PN: 302-082-000
Category: annual maintenance kit for the EVAIR compressor.
- •Intended for planned (scheduled) maintenance of the EVAIR compressor.
- •Includes a set of consumable elements/parts to be replaced during maintenance.
- •Used by trained service personnel according to the GE schedule.
- •Selected according to the EVAIR compressor model and generation.
Confirm the exact contents of the kit with the engineer when ordering — in the «MediAccessori» catalog PN 302-082-000 is listed as «Annual maintenance kit for the EVAIR compressor».
4. Signs that servicing is needed
- •Increased time to reach operating pressure.
- •Frequent switching on/overloading of the compressor.
- •A drop in pressure or air flow in the circuit.
- •Unusual noise or vibration.
- •System warnings about air pressure.
Even in the absence of obvious signs, observe the scheduled annual maintenance with kit 302-082-000.
5. How the annual maintenance is carried out
- Disconnect the machine from the mains and the gas lines, and relieve the pressure.
- Remove the covers/gain access to the compressor unit according to the GE instructions.
- Remove and replace the consumable elements with kit 302-082-000.
- Check the condition of the filters, seals and fastenings.
- Reassemble the unit and connect the machine.
- Perform a check: pressure, air flow, absence of leaks.
The work is performed by trained/service personnel; use only the original kit.
6. Prevention and recommendations
- •Follow the maintenance schedule from the manufacturer's manual (typically once a year or by operating hours).
- •Use the original kit 302-082-000 for correct conformity.
- •Monitor the cleanliness of the compressor ventilation and the room filters.
- •Keep a maintenance log for each machine.
7. Compatibility table
| PN | Item | Equipment type | Note |
|---|---|---|---|
| 302-082-000 | annual maintenance kit | EVAIR compressor (GE) | verify the compressor model and generation |
Exact compatibility depends on the EVAIR compressor model. Before ordering, send the device model to the engineer.
8. Common mistakes
- •Skipping scheduled maintenance. Leads to unplanned breakdowns and downtime.
- •Ordering a kit that does not match your compressor model. 302-082-000 is for EVAIR.
- •Replacing with non-original equivalents. Risk of non-conformity and damage to the compressor.
- •Dismantling it yourself without qualifications. This must be performed by trained personnel.
9. Delivery and procurement
«MediAccessori» supplies original GE maintenance kits to Russia and the CIS countries:
- •Delivery time is confirmed when the order is confirmed.
- •Rare items: the time is confirmed when the order is confirmed.
- •Assistance in selecting by compressor model and PN.
- •Provision of accompanying documentation.
10. How to order
- Write to Telegram @GEpartsV_bot or to the email [email protected].
- State the EVAIR compressor model and PN 302-082-000.
- The engineer will confirm compatibility and issue a quotation.
- Contract/invoice, prepayment, delivery.
11. Contacts
- •Telegram: @GEpartsV_bot
- •Email: [email protected]
- •Website: medicapartsrus.com
Sources: «MediAccessori» catalog (products_current.json, PN 302-082-000); GE Healthcare documentation; the experience of service engineers.
Frequently asked questions
Need the part number?
Send us the equipment model or the part number and we will check it against the catalogue. You can also search the parts catalogue directly.