← All articles
2026-09-05•~3 min readD-lite+Pedi-lite+spirometryflow sensorCarescape R860GE

GE D-lite+ and Pedi-lite+ Sensors: Choosing a Flow Sensor for Adult and Pediatric Spirometry

Single-use GE respiratory flow sensors for spirometry: D-lite+ (896952) for adults, Pedi-lite+ (8001948) for children. Compatibility with Carescape R860, hygiene, where to buy.

Spirometry and ventilation monitoring are an obligatory part of patient management during general anaesthesia and intensive care. The accuracy of measurements of tidal volume, minute ventilation and lung compliance depends on the quality of the flow sensor installed in the breathing circuit. GE Healthcare offers a line of single-use flow sensors, D-lite+ and Pedi-lite+, which cover the needs of adult and paediatric patients.

In this guide we look at the D-lite+ (PN 896952) and Pedi-lite+ (PN 8001948) sensors — their purpose, differences, selection rules and procurement for clinics in Russia and the CIS.

1. Why D-lite+ and Pedi-lite+ sensors are needed

The flow sensor is installed in the breathing circuit between the Y-connector and the patient. It measures:

  • •tidal volume (Vt) and minute ventilation (MV);
  • •inspiratory and expiratory flow;
  • •the parameters for calculating lung compliance and resistance.

Accurate data allow the anaesthesiologist and intensivist to adjust ventilation parameters in good time and to notice changes in the patient's lung condition.

2. D-lite+ (896952) — adult sensor

PN: 896952

Category: D-lite+ single-use respiratory flow sensor for adult patients.

  • •Optimised for adult patient breathing volumes.
  • •Provides stable readings in standard and high-flow ventilation.
  • •Used simultaneously for gas monitoring and spirometry.

Features:

  • •low flow resistance;
  • •compatible with GE circuits (verify the adapter);
  • •single-use version — eliminates cross-infection.

3. Pedi-lite+ (8001948) — paediatric sensor

PN: 8001948

Category: Pedi-lite+ single-use respiratory flow sensor for children.

  • •Designed for the small breathing volumes of children.
  • •High sensitivity at low flows — correct readings in newborns and young children.
  • •Used in paediatric and neonatal anaesthesiology and intensive care.

Features:

  • •small sensor dead space;
  • •accurate spirometry at low Vt;
  • •single-use version for the protection of small patients.

4. Selection: adult or paediatric sensor

CriterionD-lite+ (896952)Pedi-lite+ (8001948)
Patientsadultschildren, newborns
Breathing volumesstandard and highsmall (low flows)
Sensor dead spacestandardminimal
Applicationgeneral anaesthesia, ICUpaediatric/neonatal anaesthesia

Selection rule: do not use an adult sensor for a child — at small volumes the measurement error increases. A paediatric sensor is likewise unacceptable for an adult: it quickly becomes blocked and produces excessive resistance.

5. Infection safety

The D-lite+ and Pedi-lite+ sensors are single-use products. This is the main requirement of infection safety:

  • •cross-contamination between patients is excluded;
  • •no disinfection between cases is required;
  • •the requirements of SanPiN and of internal quality control are met.

Replace the sensor after each patient or in case of visible contamination. Do not attempt to wash and reuse a single-use sensor.

6. Compatibility

PNItemEquipment typeNote
896952D-lite+Carescape R860, GE spirometry systemsadult circuit
8001948Pedi-lite+Carescape R860, GE spirometry systemspaediatric circuit
A full breakdown of GE breathing tubes and circuits is in the article ge-spirometry-tubes-guide. Confirm exact compatibility for the machine model with the engineer.

7. Where to buy

«MediAccessori» supplies original D-lite+ (896952) and Pedi-lite+ (8001948) sensors to Russia and the CIS:

  • •✅ Original GE Healthcare products
  • •✅ In stock, supplied in batches for annual consumption
  • •✅ Delivery (time confirmed at order), full documentation
  • •✅ Assistance in selecting for the circuit model

Contact: Telegram @GEpartsV_bot or email [email protected].

Sources: «MediAccessori» catalog (products_accessories, PN 896952 / 8001948); GE Healthcare documentation; the experience of service engineers.

Frequently asked questions

How do the D-lite+ and Pedi-lite+ sensors differ?
D-lite+ (896952) is a sensor for adult patients with standard breathing volumes. Pedi-lite+ (8001948) is the paediatric version for small volumes and low flows in children and newborns. Using a mismatched sensor reduces the accuracy of spirometry.
With what equipment are the D-lite+ and Pedi-lite+ sensors compatible?
Both sensors are used in GE ventilation monitoring and spirometry systems, including the Carescape R860 platform. Exact compatibility with your circuit is confirmed by the engineer — send the machine model and the Y-connector type.
Why are the D-lite+ and Pedi-lite+ sensors single-use?
The single-use version is an infection safety requirement: it excludes cross-contamination between patients and the need for disinfection. Each patient receives a new sensor, which complies with sanitary norms and quality control standards.
What parameters do the sensors measure and how often should they be replaced?
The sensors measure tidal volume, minute ventilation, inspiratory/expiratory flow and take part in calculating lung compliance. Replace after each patient or in case of visible contamination; do not reuse.
Where can I buy original D-lite+ and Pedi-lite+ with delivery to Russia?
«MediAccessori» supplies original GE sensors to Russia and the CIS (delivery time is confirmed when the order is confirmed); supply in batches for annual consumption is possible. Contact us via Telegram @GEpartsV_bot, stating the machine model and circuit type.

Need the part number?

Send us the equipment model or the part number and we will check it against the catalogue. You can also search the parts catalogue directly.