Mon–Fri 9:00–18:00 MSK
TG@GEpartsV_botWA+31 6 48145815
[CONTACT US]
EN
Medicaparts
← All articles
2026-09-18•~2 min readcondensate collectorwater trap8002174D-Fendbreathing circuitminiGE

Mini Condensate Collector 8002174 and the GE D-Fend Water Trap Family

Mini condensate collector 8002174 and the GE D-Fend family: why a water trap is needed, how to choose between the mini and D-Fend Pro, installation and purchasing for Russia.

Mini Condensate Collector 8002174 and the GE D-Fend Water Trap Family

In humid breathing circuits, condensate forms; when it reaches sensors and gas analysers it degrades monitoring accuracy and can damage equipment. Water traps (condensate collectors) are used to drain moisture, and the D-Fend family from GE is one of the most common.

In this guide we examine the mini condensate collector 8002174 and its place in the GE water trap family, with a cross-reference to the full guide on D-Fend Pro.

1. Why a Water Trap Is Needed

When a patient breathes, the gas in the circuit is humidified and cooled, which produces condensate. Moisture is dangerous because it:

  • •clogs and contaminates flow sensors and gas analysers;
  • •distorts CO₂ and volume readings;
  • •triggers false alarms;
  • •when it reaches the electronics — puts the equipment out of service.

A water trap intercepts the condensate and protects the downstream components.

2. The D-Fend Family

  • •D-Fend Pro — a full-size solution (transparent M1182629 and black 876446-HEL versions). Details are in the article "ge-dfend-pro-guide".
  • •8002174 (mini) — a compact mini condensate collector for confined spaces and specific circuit configurations.

Both categories perform the same task — draining condensate — but differ in dimensions and mounting seat.

3. Breakdown of Item 8002174

PN: 8002174

Category: D-fend mini condensate collector.

  • •Compact version of the water trap.
  • •Suitable for confined breathing circuit space.
  • •Single use, replaced when full.
  • •Selected by the circuit/holder configuration.

4. Mini or D-Fend Pro?

Aspect8002174 (mini)D-Fend Pro (M1182629 / 876446-HEL)
Versioncompactfull-size
Variants—transparent / black
Applicationconfined spacestandard D-Fend holders
Packagingas specified by the sales departmentindividual/10 pcs (HEL)

The choice is determined by the mounting seat and the installation location in the circuit.

5. How to Install the Collector

  1. Shut off the gas, depressurise the circuit.
  2. Remove the old trap.
  3. Install the new one, observing orientation and securing it (until it clicks).
  4. Turn the gas on and check tightness.

6. Maintenance and Replacement

  • •Check every 50 procedures or weekly.
  • •Replace when condensate accumulation is visible.
  • •Do not reuse for another patient.

7. Common Mistakes

  • •Wrong size selection. Mini and full-size traps are not always interchangeable.
  • •Using a damaged seal. Gas leak.
  • •Ignoring filling. Condensate reaches the sensors.
  • •Reusing a single-use trap. Risk of cross-infection.

8. Delivery and Purchasing

MediAccessori supplies original GE condensate collectors to Russia and the CIS:

  • •Delivery time is confirmed when the order is confirmed.
  • •Rare items: timing is confirmed when the order is confirmed.
  • •Assistance in selecting by circuit model.
  • •Provision of accompanying documentation.

9. How to Order

  1. Write to Telegram @GEpartsV_bot or email [email protected].
  2. State the circuit model and the required PN (for example, 8002174).
  3. The engineer will confirm compatibility and issue a quotation.
  4. Contract/invoice, prepayment, delivery.

10. Contacts

Sources: MediAccessori catalogue (products_current.json, PN 8002174); D-Fend Pro guide (ge-dfend-pro-guide); service engineers' experience.

Frequently asked questions

What is the difference between the mini collector (8002174) and D-Fend Pro?
The 8002174 is the mini version of the condensate collector (more compact); the D-Fend Pro (M1182629 / 876446-HEL) is a full-size solution with transparent/black versions. The choice depends on the breathing circuit configuration and the installation location; both protect the sensors from condensate ingress.
What role does the water trap (condensate collector) play in the breathing circuit?
The water trap drains condensate from the breathing flow, preventing moisture from reaching sensors, gas analysers and equipment. This protects the accuracy of gas monitoring and reduces the risk of false readings and component damage.
How do I determine whether my circuit needs the mini (8002174) or the D-Fend Pro?
Look at the mounting seat/holder in your breathing circuit and the manufacturer's recommendations. Compact mini traps suit confined spaces, full-size D-Fend Pro units suit standard D-Fend holders. If in doubt, send the circuit model to the engineer.
Can the condensate collector be reused, and how often should it be checked?
Condensate collectors are usually single-use — replace them when full or per protocol, and do not reuse for another patient. Check every 50 procedures or weekly, and replace when condensate accumulation is visible.
Where can I buy original condensate collectors with delivery to Russia?
MediAccessori supplies original GE condensate collectors (including 8002174) to Russia and the CIS; delivery time is confirmed when the order is confirmed. Contact us via Telegram @GEpartsV_bot, stating the circuit model.

Need the part number?

Send us the equipment model or the part number and we will check it against the catalogue. You can also search the parts catalogue directly.