2026-06-06•~2 min readCARESCAPEDashGEmonitorcompatibilitysensors

Compatibility of GE CARESCAPE and Dash sensors — a complete explanation

A detailed breakdown of sensor and module compatibility for GE CARESCAPE and Dash monitors: M10, E-SCAIO, E-MINIC and other accessories.

When purchasing accessories for GE monitors, the main difficulty is compatibility. Even within one brand, different series — and sometimes different versions of the same series — may have different connectors and module specifications.

CARESCAPE series

CARESCAPE is GE's flagship monitoring platform with hot-swappable modular connectivity. Main accessories:

•E-SCAIO multi-gas module: compatible with CARESCAPE monitors (with a gas module slot)
•M10 oxygen sensor: CARESCAPE uses the same M10 interface as other Datex Ohmeda devices
•CARESCAPE accessories: bases, mounts, etc. — confirm the model

Dash series

Dash is a classic portable GE monitor, widely used in emergency care and during transport:

•Dedicated Dash connector: not fully compatible with CARESCAPE
•M10 oxygen sensor: some Dash models require an adapter
•CO₂ module: Dash supports a side-stream CO₂ module

Compatibility summary table

Sensor/module	CARESCAPE	Dash	Datex Ohmeda
M10 (O₂ sensor)	✅ native support	⚠️ adapter required	✅ native support
E-SCAIO	✅ slot module	❌ not applicable	✅
E-MINIC	⚠️ partial support	❌	✅
Flow sensor	✅ for the series	✅ for Dash	✅ for AS/3/S/5

Purchasing recommendations

Provide the full equipment model (with the suffix): within one series there may be version-related differences in connectors
Confirm the software version: some older software versions do not support new sensor models
Photo confirmation: before ordering, send a photo of the equipment connector

Where to buy

Medicaparts supplies original accessories for GE monitors:

•✅ Original GE Healthcare products
•✅ Help with compatibility checks
•✅ Delivery to Russia and the CIS — lead time is confirmed when the order is confirmed

Telegram: @GEpartsV_bot

Conclusion

Compatibility is the main issue when purchasing accessories for GE monitors. Use the compatibility table and the recommendations in this article to avoid mistakes when ordering.

Frequently asked questions

Does the M10 sensor work on CARESCAPE and Dash?

CARESCAPE has native support for M10. On some Dash models an adapter is required — confirm compatibility before purchase.

Can E-SCAIO be used on Dash monitors?

No. E-SCAIO is compatible only with CARESCAPE and Datex Ohmeda equipment; the Dash series is not supported.

How can compatibility errors be avoided when purchasing monitor accessories?

Provide the full equipment model (with the suffix), confirm the software version (older versions may not support new sensors), and send a photo of the connector.

Which CO₂ solutions does Dash support?

Dash supports a side-stream CO₂ module; the exact model is confirmed depending on the equipment configuration.

Need the part number?

Send us the equipment model or the part number and we will check it against the catalogue. You can also search the parts catalogue directly.