GE M10 oxygen sensor: how it works, compatible models and fault finding
The M10 oxygen sensor for GE Datex Ohmeda anesthesia machines and monitors: how it works, the compatible models, service life, diagnosis and replacement.
The M10 (O₂ cell) is a key component of GE Datex Ohmeda anesthesia machines and monitors: it provides continuous monitoring of the inspired oxygen concentration (FiO₂) and therefore of anesthesia safety.
How it works
The M10 is an electrochemical fuel-cell sensor. At its core is a membrane with a lead (Pb) anode and a platinum (Pt) cathode. Oxygen passing through the membrane is reduced at the cathode and generates a micro-current (0–100 mV) proportional to the O₂ concentration. The signal is amplified and displayed as the FiO₂ value.
Main characteristics:
- •Plug-and-play, no calibration (factory preset)
- •Response time: < 15 seconds (to 90% of the reading)
- •Service life: ~12–18 months (depending on oxygen exposure)
Compatible models
The M10 sensor is compatible with:
- •GE Datex Ohmeda Aespire — anesthesia machines
- •GE Datex Ohmeda Carestation — anesthesia stations
- •GE CARESCAPE series monitors — with an O₂ sensor connector
- •Other Datex Ohmeda devices with the standard M10 connector
Fault finding
Signs of a faulty sensor:
- •The monitor shows "O₂ sensor failure" or consistently low FiO₂ values
- •The O₂ values do not respond to a change in oxygen supply
- •The low O₂ concentration alarm does not trigger
Diagnostic sequence: 1. Check the electrical connection — wipe the contacts with a lint-free cloth 2. Check that the sensor matches your equipment model 3. Run a functional check on 100% O₂ 4. If the sensor does not respond — replace it with a new original M10
Operating recommendations
- •Store a spare sensor in sealed packaging (electrochemical cells react with oxygen in the air)
- •Keep an eye on the expiry date — the sensor has a limited shelf life even in unopened packaging
- •If the equipment is idle for a long period, remove the sensor and store it as instructed
Where to buy
Medicaparts supplies original M10 sensors from GE Healthcare:
- •✅ 100% original GE product
- •✅ Compatible with all the models listed above
- •✅ Delivery to Russia and CIS — lead time confirmed with the order
- •✅ Technical support when choosing
Telegram: @GEpartsV_bot
Conclusion
The M10 oxygen sensor is a critically important part of an anesthesia machine's safety system. Replacing it in good time (every 12–18 months) and using only original GE Healthcare components is what keeps FiO₂ monitoring accurate and the patient safe.
Sources: GE Healthcare documentation, M10 technical specifications
Frequently asked questions
Need the part number?
Send us the equipment model or the part number and we will check it against the catalogue. You can also search the parts catalogue directly.