GE R860 Ventilator Consumables: Neonatal Flow Sensor (1505-3272-000), D-FEND PRO+ Water Trap (M1200227) and Nebulizer Cable (1505-5602-000)
GE R860 ventilator consumables: neonatal flow sensor 1505-3272-000, D-FEND PRO+ water trap M1200227 and nebulizer cable 1505-5602-000. Selection, replacement, purchasing for Russia.
GE R860 Ventilator Consumables: Neonatal Flow Sensor (1505-3272-000), D-FEND PRO+ Water Trap (M1200227) and Nebulizer Cable (1505-5602-000)
The GE R860 ventilator (Engström Carestation) is one of the key intensive care platforms in critical care units. Stable and safe operation of the device depends not only on the machine itself but also on the quality of the breathing circuit consumables: flow sensors, water traps, filters and connecting elements.
In this guide we examine three consumable items for the R860: the neonatal flow sensor (PN 1505-3272-000), the D-FEND PRO+ water trap for intensive care (PN M1200227) and the nebulizer cable (PN 1505-5602-000) — their purpose, signs of wear, replacement and purchasing for clinics in Russia and the CIS.
1. Why R860 Consumables Matter
The R860 belongs to the modern GE Healthcare platforms and is used in intensive care units, including ventilation of neonates with complex neonatal support. The device continuously measures flow, pressure and volume in the breathing circuit:
- •calculates tidal volume (Vt) and minute ventilation (MV);
- •monitors circuit pressure and PEEP;
- •synchronises ventilation with the patient's spontaneous breathing efforts.
Any flow measurement error affects monitoring and can lead to false alarms or an incorrect assessment of ventilation. That is why flow sensors and the water traps protecting them are critical consumables that must be in working order.
2. Neonatal Flow Sensor (1505-3272-000)
PN: 1505-3272-000
Category: respiratory flow sensor for the neonatal circuit of the R860 ventilator.
- •Used for ventilation of neonates and young children.
- •Provides high-sensitivity measurement of low gas flows.
- •Protected by a water trap and filter against condensate and aerosols.
- •Selected by the R860 device model and the type of neonatal circuit/connector.
In the MediAccessori catalogue the item is listed as "Replacement Neonatal Flow Sensor" — a sensor for replacement. Verify exact circuit compatibility with an engineer before ordering.
2.1. Typical Signs of Flow Sensor Wear
- •Inaccurate tidal volume and minute ventilation readings.
- •Frequent false "low/high ventilation" alarms.
- •Unstable or "drifting" flow signal.
- •Sensor self-test/calibration error.
- •Visible damage to the cable or connector.
2.2. Diagnostics: Sensor or Circuit?
Before replacing the sensor, rule out circuit problems:
- Check the integrity of the breathing circuit, with no kinks or leaks.
- Make sure the water trap is not full and is not blocking the circuit.
- Check the filters for contamination.
- If the flow signal is unstable with a sound circuit, wear of sensor 1505-3272-000 is likely.
3. D-FEND PRO+ Water Trap (M1200227)
PN: M1200227
Category: D-FEND PRO+ water trap (water collector) for intensive care.
- •Installed in the breathing circuit of the R860 ventilator.
- •Collects the condensate that forms from humidified breathing gas.
- •Protects sensors, gas analysers and valves from moisture ingress.
- •The PRO+ version is intended for intensive care units.
3.1. Why a Water Trap Is Needed
When the breathing mixture is humidified, part of the moisture condenses in the circuit. Without a trap, condensate reaches sensitive components:
- •distorts flow sensor readings;
- •clogs the gas analysis unit;
- •creates a risk of damage to electronics and valves;
- •increases the risk of bacterial colonisation of the circuit.
The water trap drains the condensate, preserving monitoring accuracy and extending the service life of the circuit.
3.2. How to Service the Trap
- •Empty it when the reservoir fills, avoiding overflow.
- •Do not disassemble or wash the trap unnecessarily — it is a consumable item.
- •Replace it if the housing is damaged, cracked or the seal is compromised.
- •Check the holder and seals when replacing the breathing circuit.
3.3. Difference from Other D-Fend Models
The GE D-Fend water trap family is examined in detail in a separate article ge-dfend-condensate-collectors-guide (mini collector 8002174 and D-Fend Pro). The M1200227 is the D-FEND PRO+ version for intensive care on the R860 ventilator. If your circuit uses a different trap version (mini or D-Fend Pro), verify the mounting seat and holder.
4. Nebulizer Cable (1505-5602-000)
PN: 1505-5602-000
Category: nebulizer cable — part of the aerosol delivery system of the R860 ventilator.
- •Connects the nebulizer to the device: power and signal transmission.
- •Used with Carescape™ R860 v1.
- •When worn or with a poor connector contact, the nebulizer function does not turn on or works intermittently.
- •Replacement: the item with PN 1505-5602-000; verify the configuration with an engineer.
5. Compatibility Table
| PN | Item | Equipment type | Note |
|---|---|---|---|
| 1505-3272-000 | neonatal flow sensor | GE R860 ventilator | neonatal circuit; verify the connector |
| 1505-5602-000 | nebulizer cable | Carescape™ R860 v1 ventilator | for the nebulizer; verify the connector |
| M1200227 | D-FEND PRO+ water trap | GE R860 ventilator | intensive care; verify the holder |
Exact compatibility depends on the circuit configuration. Before ordering, send the device model and circuit type to the engineer.
6. Common Mistakes
- •Buying without the device model. The sensor and trap are tied to the platform and circuit.
- •Using an adult sensor for neonates. Measurement error on low flows.
- •Ignoring an overfilled trap. Condensate reaches the sensor and gas analyser.
- •Replacing the sensor without circuit diagnostics. First rule out leaks and trap problems.
- •Economising on original consumables. Non-original components may not meet GE tolerances.
7. Delivery and Purchasing
MediAccessori supplies original consumables for the GE R860 ventilator to Russia and the CIS:
- •Delivery time is confirmed when the order is confirmed.
- •Rare items: timing is confirmed when the order is confirmed.
- •Assistance in selecting by model and PN.
- •Provision of accompanying documentation.
8. How to Order
- Write to Telegram @GEpartsV_bot or email [email protected].
- State the R860 device model, the circuit type and the required PN (1505-3272-000, M1200227 or 1505-5602-000).
- The engineer will confirm compatibility and issue a quotation.
- Contract/invoice, prepayment, delivery.
9. Contacts
- •Telegram: @GEpartsV_bot
- •Email: [email protected]
- •Website: medicapartsrus.com
Sources: MediAccessori catalogue (products_accessories, PN 1505-3272-000 / M1200227 / 1505-5602-000); GE Healthcare documentation; service engineers' experience.
Frequently asked questions
Need the part number?
Send us the equipment model or the part number and we will check it against the catalogue. You can also search the parts catalogue directly.