Mon–Fri 9:00–18:00 MSK
TG@GEpartsV_botWA+31 6 48145815
[CONTACT US]
EN
Medicaparts
← All articles
2026-08-29•~3 min readPiCCOM1182448cablehemodynamicscardiac outputmonitoringGE

PiCCO cable (M1182448): hemodynamic monitoring and cardiac output parameters

PiCCO cable M1182448 for hemodynamic monitoring. What PiCCO is, how the cable works, compatibility with GE monitors, replacement and purchasing for Russia.

PiCCO cable (M1182448): hemodynamic monitoring and cardiac output parameters

For intensive care units, operating rooms and resuscitation areas, accurate hemodynamic monitoring is a critically important condition. The PiCCO method allows the physician to see not just arterial pressure but a whole set of parameters: cardiac output, preload, systemic vascular resistance and the extravascular lung water volume.

In this guide we examine the PiCCO cable M1182448 from the MediAccessori catalog: what it is, how it works within the hemodynamic monitoring chain, how to select and replace it, and how to purchase it for Russia.

1. What PiCCO is

PiCCO (Pulse Contour Cardiac Output — pulse wave contour analysis) is a method of minimally invasive hemodynamic monitoring that combines:

  • •Transpulmonary thermodilution — periodic calibration by injecting a cold indicator.
  • •Continuous contour analysis — constant estimation of cardiac output from the pulse wave shape.

Key measured parameters:

  • •Cardiac output (CO).
  • •Cardiac index (CI).
  • •Intrathoracic blood volume (ITBV) and preload volume.
  • •Extravascular lung water (EVLW).
  • •Systemic vascular resistance (SVR).

PiCCO is widely used in intensive care, in sepsis, burns and in complex cardiac surgery.

2. The role of cable M1182448 in the chain

The PiCCO hardware chain includes:

  1. Arterial catheter with a thermodilution sensor — at the patient.
  2. PiCCO sensor/module — converts the signal.
  3. Cable M1182448 — connects the sensor/module to the monitoring platform.
  4. Patient monitor — displays the parameters.

The cable is responsible for reliable transmission of the signal from the thermodilution sensor to the monitor. Cable quality directly affects the stability and accuracy of the displayed parameters: a damaged or incompatible cable produces "floating" readings and failures.

3. Technical aspects of selection

PN: M1182448

When selecting, take into account:

  • •The patient monitor model (GE platform and compatible units).
  • •The connector type and the interface of the PiCCO module.
  • •The cable length required for your configuration.

If the monitor model and the interface match the M1182448 nomenclature, the cable is suitable. If in doubt, send a photo of the connector and the device model to our engineer.

4. Replacement and maintenance

  • •When to replace: unstable signal, "floating" CO readings, damage to the insulation or connector, contact failures.
  • •Recommendations: follow the connection/disconnection rules, do not bend the cable sharply, protect the connector from moisture and impacts.
  • •Diagnostics: before replacing, check the sensor/module as well — sometimes the cause is not the cable.

5. Common mistakes

  • •Selecting a cable without the monitor model. PiCCO interfaces differ between platforms.
  • •Ignoring the connector. Different modules require different pinouts.
  • •Saving money on an incompatible cable. This leads to unstable monitoring in a critical patient.
  • •Ordering without confirmation. Send the model and a photo before payment.

6. Delivery and purchasing

MediAccessori supplies GE Healthcare cables and spare parts to Russia and the CIS countries:

  • •The delivery time is confirmed when the order is confirmed.
  • •Rare items: the time is confirmed when the order is confirmed.
  • •Documentation and assistance in selecting by PN.

7. How to order

  1. Write to Telegram @GEpartsV_bot or to email [email protected].
  2. State the monitor model and the PN (M1182448).
  3. The engineer will confirm compatibility and issue a quotation.
  4. Contract/invoice, prepayment, delivery, installation/connection.

8. Contacts

Sources: MediAccessori catalog (products_current.json, PN M1182448); PiCCO monitoring methods; the experience of service engineers.

Frequently asked questions

What is PiCCO monitoring?
PiCCO (pulse contour cardiac output) is a method of minimally invasive hemodynamic monitoring: through an arterial catheter with transpulmonary thermodilution, cardiac output, preload, extravascular lung water and other parameters are continuously assessed. It is used in intensive care and complex surgery.
What role does cable M1182448 (PiCCO) play in the system?
It is the signal cable connecting the PiCCO sensor/module to the patient monitor: it transmits the signal from the thermodilution sensor to the monitoring platform, ensuring accurate display of cardiac output and other parameters.
How do I check whether M1182448 is compatible with my monitor?
Determine the PiCCO interface type of your monitor/module and the required PN. Send the device model and a photo of the connector to our engineer — compatibility is confirmed before purchase.
Does the PiCCO cable need periodic replacement?
The signal cable is a consumable component: replace it if the signal is unstable, the readings float, or the insulation or connector is damaged. Careful handling and avoiding kinks extend its service life.
What are the delivery times for M1182448?
MediAccessori supplies to Russia and the CIS: the delivery time is confirmed when the order is confirmed. When requesting, state the monitor model and the PN.

Need the part number?

Send us the equipment model or the part number and we will check it against the catalogue. You can also search the parts catalogue directly.