GE anesthesia machine spare parts

GE Anesthesia Machine Bellows

GE Anesthesia Machine Bellows (PN 1500-3378-000) is an anesthesia machine part for GE Healthcare equipment. The part number identifies the item; compatibility with a specific machine is confirmed by PN before ordering.

Air/Oxygen Mixer Board

Air/Oxygen Mixer Board (PN 1011-8000-000-S) is an anesthesia machine part for GE Healthcare equipment. The part number identifies the item; compatibility with a specific machine is confirmed by PN before ordering.

APL Diaphragm

For use with: Aestiva

DIAPHRAGM APL BCG

C600 Oxygen Sensor

For use with: GE 600

C600 Oxygen Sensor (PN 2071018-001-S) is an anesthesia machine part for GE Healthcare equipment. The part number identifies the item; compatibility with a specific machine is confirmed by PN before ordering.

Soda Lime Canister

For use with: GE Datex Ohmeda

Soda Lime Canister (PN 1407-7004-000) is an anesthesia machine part for GE Healthcare equipment, used with Datex Ohmeda. The part number identifies the item, and the compatible equipment models confirmed for it are listed on this page.

GE M10 Anesthesia Machine Oxygen Sensor

For use with: GE Datex Ohmeda: Aespire, Carestation, Avance, AS/3, S/5

GE M10 Anesthesia Machine Oxygen Sensor (PN M10) is an anesthesia machine part for GE Healthcare equipment, used with AS/3, Aespire, Avance, Carestation, Datex Ohmeda. The part number identifies the item, and the compatible equipment models confirmed for it are listed on this page.

APL Valve

For use with: Aelite NXT

APL Valve (PN 2100552-001-S) is an anesthesia machine part for GE Healthcare equipment, used with Aelite NXT. The part number identifies the item, and the compatible equipment models confirmed for it are listed on this page.

VALVE FLPR 1.062D .875L W/TPR STEM SIL BCG

VALVE FLPR 1.062D .875L W/TPR STEM SIL BCG (PN 0211-1454-100) is an anesthesia machine part for GE Healthcare equipment. The part number identifies the item; compatibility with a specific machine is confirmed by PN before ordering.

D-Fend Pro Water Trap (Black)

For use with: GE D-Fend: D-Fend Pro

D-Fend Pro Water Trap (Black) (PN 876446-HEL) is an anesthesia machine part for GE Healthcare equipment, used with D-Fend, D-Fend Pro. The part number identifies the item, and the compatible equipment models confirmed for it are listed on this page.

Nitrous Oxide Needle Valve

For use with: GE Aespire

Nitrous Oxide Needle Valve (PN 1006-8345-000) is an anesthesia machine part for GE Healthcare equipment, used with Aespire. The part number identifies the item, and the compatible equipment models confirmed for it are listed on this page.

APL Valve

For use with: Aestiva

APL Valve (PN 1406-8202-000-S) is an anesthesia machine part for GE Healthcare equipment, used with Aestiva. The part number identifies the item, and the compatible equipment models confirmed for it are listed on this page.

Oxygen Cell Cable

For use with: Anesthesia Other

CABLE O2 SENSOR

Bellows U-Cup Seal

For use with: Aestiva

SEAL U-CUP ABA

Condenser Assembly

For use with: GE Aespire

Tube Assembly Breathing Circuit Gas (BCG) Mechanical

Soda Lime Canister Lid

For use with: 1407-7004-000

COVER ASSY CO2 CANISTER WITH BRACKET AND O-RING

C600 Power Board

For use with: Carestation 600 Series

ACIN 100-240V, DCOUT: 12.6V, ECM140US12-A-XA1049

Check Valve Assembly

For use with: Carestation 600 Series

CHECK VALVE ASSY

Elbow Connector

For use with: 9 Series -ACS

Elbow Connector 1/8"inch 3.2mm Inner Diameter (ID)

Viewing Port Plug

For use with: Aestiva

OEM, PLUG SIGHTGLASS

C30 Oxygen Sensor

For use with: Carestation 30 -ACS

Assembly Oxygen Sensor

Seal Ring

For use with: Aespire

PART, O-RING OD30 ID22 4W BCG SILICONE 40 DURO, Injection molded

O-Ring

PART, O-RING .562ID .750OD .093W SILICONE 45-55DURO

Single-Use Spirometry Tube, 3 m

Spirometry Tubes, Single Patient Disposables, 3M, Yellow (QTY 5)

O-Ring

For use with: GE Datex Ohmeda

PART, O-RING 34.59ID 39.83 BCG OD 2.62 W EPR 60 DURO, Injection molded

7100 PEEP Calibration Tool

For use with: Aestiva

TOOL SERV PEEP/INSP CAL ABS 7100 VENT

Sevoflurane QUIK-FIL Adapter Assembly

Sevoflurane QUIK-FIL Adapter Assembly (PN 115-026747-00) is an anesthesia machine part for Mindray equipment. The part number identifies the item; compatibility with a specific machine is confirmed by PN before ordering.

System Disk

For use with: 9100C,NXT

System Disk (PN 2107870-120) is an anesthesia machine part for GE Healthcare equipment. The part number identifies the item; compatibility with a specific machine is confirmed by PN before ordering.

APL Valve

For use with: AESPIRE 7100

APL Valve (PN 2106569-001-s) is an anesthesia machine part for GE Healthcare equipment, used with AESPIRE 7100. The part number identifies the item, and the compatible equipment models confirmed for it are listed on this page.

Oxygen Cell Cable

For use with: GE M10

Oxygen Cell Cable (PN 1009-5570-000) is an anesthesia machine part for GE Healthcare equipment. The part number identifies the item; compatibility with a specific machine is confirmed by PN before ordering.

9100C NXT Maintenance Kit, Year 1, 2099998-001-S

For use with: 9100C NXT

9100C NXT MAINTENANCE KIT YEAR ONE

Push-Button Encoder

ENCODER ROTARY 16 POSN W/PUSH BUTTON SWITCH

D-Fend Pro Water Trap (Clear)

For use with: GE D-Fend: D-Fend Pro

D-Fend Pro Water Trap (Clear) (PN M1182629) is an anesthesia machine part for GE Healthcare equipment, used with D-Fend, D-Fend Pro. The part number identifies the item, and the compatible equipment models confirmed for it are listed on this page.

A180 VENTILATOR ENGINE SERVICE ASSY

For use with: Carestation 600 Series

A180 VENTILATOR ENGINE SERVICE ASSY

9100C Display Control Board

For use with: 9100C

ASSY-WXC PWA ASSEMBLY 9100C DISPLAY MONITOR BOARD SPARE PART

BIS Module

BIS Module (PN 6800-30-50851) is an anesthesia machine part for Mindray equipment. The part number identifies the item; compatibility with a specific machine is confirmed by PN before ordering.

Display Control Board

For use with: 9100C NXT

Display Control Board (PN M9100000-S) is an anesthesia machine part for GE Healthcare equipment. The part number identifies the item; compatibility with a specific machine is confirmed by PN before ordering.

Fan Communication Tool

For use with: Carestation 600 Series

OEM PART, KIT FAN COM EXPRESS, Electro-Mechanical

Assembly Vent Engine

For use with: Carestation 30 -ACS

Assembly Vent Engine

APL Valve

For use with: Carestation 600 Series

APL Valve (PN 2090000-001-S) is an anesthesia machine part for GE Healthcare equipment, used with Carestation 600 Series. The part number identifies the item, and the compatible equipment models confirmed for it are listed on this page.

Soda Lime Canister Foam Pad

For use with: 1407-7004-000

Pack of 40

Seal Ring

For use with: Anesthesia Other

ASSY-MSN, KIT SPARE O-RING VLV PORT STEETON NO 46147

APL Breathing Circuit Baffle Assembly

For use with: Carestation 600 Series

ASSY DIAPHRAGM APL BCG

Flow Sensor

Autoclavable flow sensor for Compact Breathing System (CBS) devices, such as Carestation™ 600 Series and Carestation 750

Sevoflurane Filling Adapter

EASY-FIL BOTTLE ADAPTER, VAPORIZER, SEVOFLURANE

Exhaust line with Colder fitting, 18cm/7in

Exhaust Line with Colder fitting for gas return or scavenging, 18 cm/7 in., connectors: Female Luer-Lok and straight Colder Male Fitting, disposable

Exhaust line with Colder fitting, 1.0m/41in

Exhaust Line with Colder Fitting for gas return or scavenging, 1m/41 in., connectors: Female Luer-Lok and straight Colder Male Fitting, disposable

Flow Sensor

For use with: 9 Series -ACS

A Differential Pressure Sensor Assembly - Phantom is a special type of pressure sensor that measures the change in pressure across two ports on a device. The part Assembly-WXC is a necessary part of the GE 9100C ventilator. The tube and cables are made up of high quality materials and the assembly is more stable under stringent conditions.

Absorber Seal

For use with: Aestiva

ASSY-MSN, AESTIVA TNA MISC SEALS KIT, Manufacturing assembly - Make

Autoclavable Flow Sensor

For use with: GE Datex Ohmeda

Flow sensor – autoclavable: Newest flow sensor designed to work in the presence of moisture with pressure sense lines kink prevention. Single piece flow sensor body design with titanium flapper. Will last for a minimum of 1 year. Can be used in MRI environments.

GE Datex Ohmeda Respiratory Flow Sensor

For use with: GE Datex Ohmeda: AS/3, S/5, Aespire, Carestation

GE Datex Ohmeda Respiratory Flow Sensor (PN 2089610-001) is an anesthesia machine part for GE Healthcare equipment, used with AS/3, Aespire, Carestation, Datex Ohmeda. The part number identifies the item, and the compatible equipment models confirmed for it are listed on this page.

Soda Lime Canister

The Reusable Canister Assembly is one of the parts of the breathing system. It is the container, which is used to remove carbon dioxide from the patient’s exhaled breath. It is reusable so that the canister should be weighted to monitor the lifespan on a regular basis. It should be replaced when the weight is reached as per design. It can be used with the EZChange option. Ejector pins to be flush to 0.3 recessed and gate heights ± 0.3 mm also the maximum flash permissible is 0.05 wide x 0.05 high. All the ribs should be 1.5 ± 0.5° DFT wide unless otherwise specified.

Shelf

For use with: Aespire

The Diaphragm & Seat Sub-Assembly is a component of breathing circuit gas system used to regulate the pressure in the breathing circuit. The pressure relief valve assembly provides accurate pressuring while ventilating a patient with the use of diaphragm. The amount of pressure buildup in the bellows should be limited and also gases are to be released for scavenging. For adjusting these pressure limits, a diaphragm and seat subassembly are used as a part of pressure relief valve assembly. These are being used in MS CARESCAPE™ Monitor B650, ARC iCentral, MS Dash™ 4000, ARC Aestiva 7100, MS PRN50 Writer, ARC Airway Gas Module, ARC iVent 201, ARC Testing Service, MIC Giraffe™ Warmer, ARC Aestiva 3000, MS CIC Pro, ARC Anesthesia Monitor, MIC Panda™ iRES Warmer, ARC Aespire 7100, MS Solar 8000, ARC Airway Gas Module, ARC iVent 201, ARC Testing Services, MS CO₂ MODULE, ARC Monitor CardioCap 5, MS CIC Pro v5, ARC Aestiva MRI, ARC Engstrom Carestation, ARC Aestiva 7100, ARC Aisys, ARC Monitor, ARC S/5 Monitor FM, ARC Airway Gas Module, ARC S/5 Monitor Anesthesia, ARC ADU, ARC Monitor CardioCap 5, ARC Airway Gas Module, ARC Light Monitor, ARC ADU, ARC MRI Monitor, ARC Aestiva 7100, ARC Aespire 7900, ARC Tec 6 Plus and ARC Aespire View.

VALVE FLOW CONTROL 120 LPM 12V MPOS

For use with: Aespire

The Flow Control Valve comes as a part of the vent engine manifold of an Anesthesia Delivery System. It is used to control the gas flow through the Medium Pressure Oxygen Service (MPOS) manifold, which is provided as a part of the vent engine in Breathing Circuit Gas (BCG) of the ventilator. The assembly comes into contact with oxygen-enriched gas in the range of 50 to 3000 kPa. The components are corrosive resistant and hence it is highly efficient to use in medical environments.